Wilson UH4000 Series Hardness Testers (UH4000 Series)

FEATURES
  • Ease of use with DiaMet operation Software
  • Flexible configuration for specific requirements
  • Increase up time
  • Reduced service costs
  • Full protection for production environments
  • Stability during the test process

The Wilson UH4000 series universal hardness tester is designed for high volume production labs and production floor environments. As a Universal hardness tester, the UH4000 series can perform several different hardness scales in one machine including Vickers, Knoop, Brinell and Rockwell, in most cases at higher loads (>5 kgf)

The UH4000 series testers contain all standardized and usual hardness testing methods between 0.5-250kgf and 3-750kgf, according to ISO 6506,6507,6508 and 4545 and ASTM E18, E10 & E92. Additionally plastics and carbon testing can be performed according to ISO2039 and DIN51917

  • Fast and flexible to satisfy the required complex features with Diamet operation Software
  • The optional clamping tool will ensure stability during the test process
  • 8 position turret to have all objectives and identifiers
  • Laser for easy test location targetting and a ringlight for best Brinell measurement accuracy
  • Steel casting provides full protection for production environments
  • TESTERUH4250UH4750
    HARDNESS SCALESHV 0.5 - HB 10/250HV 3 - HBW 10/750
    TEST LOAD RANGE0.5-250 kgf3-750 kgf
    TEST LOAD TYPEClosed loop
    OPTICS5-megapixel USB 3 digital camera, with digital zoom and autofocus
    TURRET8 positions for objectives and indenters 
    OBJECTIVES LONG2.5x (optional with ring light) 
    WORKING DISTANCE (OPTIONAL)

    5x
    10x
    20x
    40x
    50x 

    INDENTERS (OPTIONAL)Brinell 1mm, 2.5mm, 5mm and 10mm carbide balls
    Rockwell diamond cone, 1/16”, 1/8”, ¼”, ½” carbide ball indenters
    Vickers diamond
    Knoop diamond 
    OPTICAL MEASUREMENTManual or Auto-measurement of indent images
    BRINELL TEST PROCEDURES
    ISO 6506-1, ASTM E10
    HB1: 1, 2.5, 5, 10, 30
    HB2.5: 6.25, 15.625, 31.25, 62.5, 187.5
    HB5: 25, 62.5, 125, 250, 750*
    HB10: 100, 250, 500* 
    VICKERS TEST PROCEDURES
    ISO 6507-1, ASTM E92
    HV0.5, HV1, HV2, HV3, HV5, HV10, HV20, HV30, HV50, HV100
    ROCKWELL TEST PROCEDURES
    ISO 6508-1, ASTM E18

    A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, 15N, 30N, 45N, 15T, 30T, 45T, 15W,
    30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y 

    KNOOP TEST PROCEDURES
    ISO 4545-1, ASTM E384
    HK0.5, HK1, HK2 
    PLASTIC TESTING BALL
    INDENTATION ISO 2039-1
     HB5: 49N, 132N, 358N, 961N

    PLASTIC TESTING BALL
    INDENTATION ISO 2039-2

    HRR, HRL, HRM, HRE 
    ROCKWELL CARBON TESTING BALL INDENTATION DIN 51917HR2.5: 7
    HR5: 7, 20, 40, 60, 100, 150
    HR10: 20, 40, 60, 100, 150 
    BRINELL DEPTH TESTING
    (NON-STANDARDIZED)
    HBW-T
     HB-T2.5: 6.25, 15.625, 31.25, 62.5, 187.5
    HB-T5: 25, 62.5, 125, 250, 750*
    HB-T10: 100, 250, 500*
    PCExternal standalone PC with 24” monitor or 19,5” touch monitor 
    MACHINE CONTROLDiaMet software 
    Z SPINDLE Manual hand wheel and automatic Z axis drive
    CLAMPING DEVICE
    (OPTIONAL)
     Unique clamping fork to fix the sample for testing, can be switched on and off
    POSITIONING LASER (OPTIONAL) Cross target, class 1, 650nm
    RING LIGHT (OPTIONAL)For 2.5x objective, simplifies soft Brinell measurements 
    MAXIMUM SPECIMEN HEIGHT300 mm [11.8 in]
    MAXIMUM SPECIMEN WEIGHT70 kg [154 lb]
    DEPTH FROM CENTER LINE274 mm [10.7 in]
    TEST STAGE DIMENSIONST-slot stage with 12mm slot width, 300mm [11.8in] x 400mm [15.7in]
    OPERATING TEMPERATURE RANGE10° to 38°C [50° to 100°F]
    HUMIDITY10% - 80% non-condensing 
    MACHINE DIMENSIONS (L × W × H)704 mm [28 in] × 534 mm [21 in] × 995 mm [39.2 in]
    ACCESSORYAll anvils with 25mm pin 
    MACHINE NET WEIGHTCa. 300 kg [660 lb]
    POWER SUPPLY110 - 240V / 50 - 60Hz